How much firewood a house needs depends on four things: how much heat the house loses, how much of that heat comes from wood, what wood you burn, and how efficient the stove is. A rule of thumb like "four cords a winter" can be off by half in either direction.

First, what is a cord?

A full cord is a stack 4 feet high, 4 feet deep, and 8 feet long: 128 cubic feet of wood, bark, and air. Many states define it that way in weights-and-measures law. A face cord (also called a rick or a rank) is one row 4 feet high and 8 feet long, as deep as the pieces are long. With 16-inch pieces, a face cord is one third of a full cord. Always ask a seller whether the price is for a full cord or a face cord, and what the piece length is.

Heat per cord

EIA uses about 20 million Btu per cord as a typical figure. Real wood varies widely. Dense hardwoods like oak, hickory, and sugar maple carry roughly 24 million Btu or more per air-dried cord. Softwoods and light hardwoods like pine, spruce, aspen, and poplar may carry about 15 million or less. Buying by the cord, you pay for volume, so dense wood gives you more heat per dollar at the same price.

Moisture is the biggest variable you control

Freshly cut wood can be half water by weight. Burning it wastes energy boiling that water off, makes less heat, and builds up creosote in the chimney. The EPA's Burn Wise program recommends burning wood with moisture content of 20% or less. Most hardwood needs at least six months, and often a year or more, split and stacked off the ground with the top covered and the sides open to the wind. A cheap moisture meter, used on a freshly split face, tells you for sure.

The formula

cords = heat needed from wood (MMBtu) ÷ (MMBtu per cord × moisture factor × stove efficiency)

Using 24 MMBtu per cord for seasoned dense hardwood and a 70% efficient stove, each cord delivers about 16.8 MMBtu of heat to the house. Examples (house heat loads estimated from size and climate as on the calculator):

SituationHeat from woodSeasoned oak-typeGreen softwood
Minnesota, 1,800 sq ft, average house, wood supplies all heat79 MMBtu4.7 cords10.4 cords
Same house, wood supplies half the heat39 MMBtu2.3 cords5.2 cords
Pennsylvania, 1,800 sq ft, average house, all heat53 MMBtu3.2 cords7.0 cords
Full cords, 70% stove efficiency. Estimates; your house may differ substantially.

Stove efficiency

An EPA-certified stove or insert typically delivers 70–80% of the wood's heat. Older uncertified stoves may manage 50–60%. An open masonry fireplace often delivers 15% or less and can even pull warm air out of the house. If you heat with a fireplace, an insert is the single biggest improvement you can make.

Practical tips

  • Buy 15–25% more than the estimate for a cold winter, and stack next year's wood to season while you burn this year's.
  • Measure a delivered load: stack it neatly and multiply length × height × depth in feet, then divide by 128.
  • Moving firewood long distances can spread invasive pests. Many states restrict it, so buy locally.

Get a number for your house with the firewood cord calculator, or compare wood against other fuels in the main calculator once you have a local price per cord.