Core formula

delivered MMBtu per unit = Btu per unit × efficiency ÷ 1,000,000 cost per MMBtu delivered = price per unit ÷ delivered MMBtu per unit annual cost = cost per MMBtu delivered × annual heat load (MMBtu) units per year = annual heat load ÷ delivered MMBtu per unit

Efficiency is a fraction (AFUE 0.95 = 95%) for combustion equipment and electric resistance, and the seasonal coefficient of performance (COP) for heat pumps.

Heat content and default efficiency

FuelBtu per unitDefault efficiency
Natural gas100,000 / therm95%
Propane91,452 / gallon95%
Heating oil138,500 / gallon85%
Electric resistance (baseboard, electric furnace)3,412 / kWh100%
Air-source heat pump3,412 / kWhCOP 2.5
Ground-source (geothermal) heat pump3,412 / kWhCOP 3.5
Firewood (cordwood)20,000,000 / cord70%
Wood pellets16,500,000 / ton80%
Kerosene135,000 / gallon85%
Heat contents for natural gas (100,000 Btu/therm; 1,036 Btu/cu ft), propane, heating oil, electricity, and cordwood are EIA's published typical values. Pellets (16.5 million Btu/ton) and kerosene (135,000 Btu/gal) are commonly cited EIA/DOE typical values. The air-source heat pump COP defaults to 2.2, 2.5, or 3.0 depending on how cold the state is.

Prices

  • Propane and heating oil: EIA Weekly Heating Oil and Propane Update, residential prices including taxes, latest survey week November 16, 2026. EIA collects these weekly during the heating season (October through March). States EIA doesn't survey use the regional (PADD) average or the U.S. average, and the page says so.
  • Natural gas: EIA average price delivered to residential consumers, by state, monthly, in dollars per thousand cubic feet. Converted to dollars per therm by dividing by 10.36 (1,036 Btu per cubic foot). We use the simple average of the most recent November–March months, because summer prices per unit are much higher when fixed charges are spread over little gas, and using them would overstate heating cost. Latest month in the data: 2026-08.
  • Electricity: EIA Electric Power Monthly, Table 5.6.B, average residential price by state, year to date (August 2026 YTD). Year-to-date smooths out single-month swings.
  • Firewood, pellets, kerosene: no current government state price series exists, so the calculator leaves them out until you type a price. We don't guess.

Averages include taxes and the utility fixed charges spread over the volume sold. They are not what any one household pays, and EIA revises recent months. We don't alter the numbers other than unit conversion and averaging as described here.

Heat load estimate

annual heat load (MMBtu) = floor area (sq ft) × heating degree days × heat-loss factor ÷ 1,000,000

Heating degree days are NOAA Climate Prediction Center population-weighted state normals (65°F base), taken from the annual July–June summary (Jul 2025 - Jun 2026). Heat-loss factors: 3.5 (newer or well insulated), 5 (average), 7 (older or drafty) Btu per square foot per degree day. These are planning-grade assumptions calibrated so a typical 2,000 sq ft Minnesota house lands near the 800–1,000 therms of space heating such homes commonly use. Actual homes vary a lot. Your past fuel use is a better guide, and an energy audit or Manual J calculation is better still.

heat load from bills = units used × Btu per unit × current efficiency ÷ 1,000,000

Firewood and propane tank formulas

cords = heat load from wood ÷ (MMBtu per cord × moisture factor × stove efficiency) face cords per full cord = 48 in ÷ piece length (in) tank gallons = capacity × gauge % (cylinders: lb ÷ 4.24 lb/gal) runtime hours = gallons × 91,452 ÷ (input Btu/h × share of time running)

Wood heat content by group (about 24, 20, and 15 million Btu per air-dried cord) and the moisture factors (1.0, 0.88, 0.72) are rounded planning values consistent with university extension firewood tables; individual species and loads vary widely.

Sources

  1. EIA Weekly Heating Oil and Propane Update - residential No. 2 heating oil prices
  2. EIA Weekly Heating Oil and Propane Update - residential propane prices
  3. EIA Natural Gas Prices - average price delivered to residential consumers, monthly
  4. EIA Electric Power Monthly, Table 5.6.A - average residential price by state, latest month
  5. EIA Electric Power Monthly, Table 5.6.B - average residential price by state, year to date
  6. NOAA Climate Prediction Center - population-weighted state heating degree days
  7. EIA: Energy units and calculators explained (Btu conversion factors)
  8. EIA: How do I compare the cost of heating fuels?
  9. EIA Heating Oil and Propane Update
  10. EIA Monthly Energy Review, Appendix A (heat content)

Data attributed to the U.S. Energy Information Administration (EIA) and NOAA. This site is not affiliated with or endorsed by either agency.